Setek WiFi Range Extender Setup Guide: Web Browser & WPS Methods

Setting up your Setek WiFi range extender is simple and can be done using either of two convenient methods: the web-based setup via a browser or the WPS (Wi-Fi Protected Setup) method. Below is a step-by-step guide for both options:

Method 1: Setup via Web Browser

1. Power On the Extender:
   Plug the Setek WiFi extender into a power outlet to turn it on.

2. Connect to the Extender’s Network:
   On your PC or laptop, connect to the extender’s default WiFi network (SSID).

3. Access the Configuration Page:
   Open an updated web browser and enter 192.168.10.1 in the address bar. This will take you to the setup interface.

4. Login to the Admin Panel:
   When prompted, enter the default admin password, which is admin, to log in.

5. Connect to Your Main Router:
   From the interface, select your main router’s WiFi network and input its password to establish a connection.

6. Set Extended Network Credentials:
   On the following page, create a custom name (SSID) and password for your extended network. Click Save.

7. Finalize Setup:
   The extender will automatically reboot to apply the settings. Once it restarts, you can connect your devices to the newly extended network.

Method 2: Setup via WPS

1. Position the Extender:
   Plug the extender into a power outlet near your router.

2. Initiate WPS Pairing:
   Press the WPS button on the extender. Within two minutes, press the WPS button on your router.

3. Establish the Connection:
   Wait for the extender’s WPS LED to turn solid, indicating a successful connection.

4. Connect to Extended Network:
   Your Setek WiFi range extender is now configured. You can connect your devices using the same password as your router’s SSID.